Stainless Steel Foot Pump Hand Sanitizer Dispenser – Hands Free



Dromex® F103, light weight and easy to breathe, disposable 3 PLY face masks

Found this product at a lower price?
SKU: DR-F103 Category:

Dromex® F103, light weight and easy to breathe, disposable 3 PLY face masks,
is intended to cover the nose and mouth in order to minimise the incidence
of cross infection of airborne infective bacterial agents generated from the
respiratory tract, suitable for use in surgical, medical, dental, food preparation
and other clean or sensitive environments.

Dromex® DR-F103 disposable dust mask, features the following:
• An adjustable soft aluminium nose bar allows for ease of moulding onto
nose and optimum fit
• 100% Latex free ear band loop prevents irritation and eliminates pressure
on the ear
• Hypoallergenic due to the polypropylene synthetic material preventing
• Glass fibre free
• Automatic ultrasonic bonding adds to the cleanliness of the mask
• Light weight and comfortable to use in humid environments
• A 3 pleat triple layer construction provides stronger support to the mask.
Special Instructions
Disposable face masks must only be used once and there after disposed off
Face masks should also removed and replaced with new mask when they
become moist.
These respirators do not supply oxygen. DO NOT use in oxygen deficient
atmospheres (e.g. tanks or other poorly ventilated areas).
The lifetime of the respirator depends on many factors including the work rate,
the airflow and the concentration of the contaminant in the atmosphere.
A dust mask should be discarded and replaced with a new one if:
• The respirator is removed while in a contaminated area.
• Excessive clogging of the respirator causes breathing difficulty or discomfort.

• The respirator becomes damaged.
• The unused respirators are not in their protective packaging (once open they
are activated).
Do not use these respirators or enter in an area where:
• The Oxygen concentration is not known or is less than 19%.
• Contaminants or their concentrations are unknown or are known to be
immediately dangerous to life or health.
• Particulate concentrations exceed levels fixed by the applicable health and
safety regulations.
• The requirement for leak tightness is unlikely to be achieved if worn against a
beard or facial stubble.
• Do not use in explosive atmospheres.
• Not to be used for firefighting.
When transporting this product, retain in its original packaging and keep away
from mechanical and chemical hazards.
None of the materials or processes used in the manufacture of these products
are known to be harmful to the wearer. The manufacturer has examined under
the system for ensuring quality of production by means of monitoring and
These disposable dust half masks are designed to accommodate the basic
safety requirements and standards for Personal Protective Equipment.
The information contained herein is intended to assist the wearer in the
selection of personal protective equipment.
Actual conditions of use cannot be directly simulated in a test environment
therefore it is the responsibility of the user and not the manufacturer or supplier
to determine the disposable dust, half mask suitability for the intended use.

Compliance & Conformity
This mask is a manufactured to EN ISO 13485:2016 requirements and is subject
to yearly surveillance.
CE approved.

Style: Blue colour, triple layer (3 Ply) disposable,
ear loop type, adjustable dust mask
Bacterial filtering efficiency: 95%
Materials: Spun bonded polypropylene non-woven
fabric with filter in between
Specific materials:
Outer Coverstock – 20 gsm
Middle Filter Medium – White 25gsm
Inner Coverstock – 25gsm
Loops – Elasticated, polypropylene covered


Packaging, Storage & Obsolescence
DR-F103 – Packed as 50 masks in a box and 50 boxes in a carton for shipping.
Keep unused respirators in their closed box and store in a dry noncontaminated area between -15 degrees and 40 degrees Celsius and away from
high frequency equipment.

Cleaning & Maintenance
This is a disposable item therefore cleaning and maintenance is not required.
Shelf life
3 years. The expiry date of each item is indicated on box packaging.
How to put on a face mask
1. Clean your hands with soap and water or hand sanitizer before touching the
2. Remove a mask from the box and make sure there are no obvious tears or
holes in either side of the mask.
3. The blue colored side of the mask will be the front and will face away from
The white side touches your face.
4. Place mask ear loops around each ear.
5. Mold the alumium nose bridge to the shape of your nose.
6. Pull the bottom of the mask over your mouth and chin.

How to remove a face mask
1. Clean your hands with soap and water or hand sanitizer before touching the
mask. Avoid touching the front of the mask. The front of the mask is
contaminated. Only touch the ear loop.
2. Hold both of the ear loops and gently lift and remove the mask away from
your face
3. Throw the mask in the trash. Clean your hands with soap and water or hand

All industrial waste should be disposed of correctly according to local
regulations and good disposal practice. Respiratory protective devices should
be disposed of considering the hazardous substances they were used for.
Please consider recycling.

Additional information




Reviews (0)


There are no reviews yet.

Be the first to review “Dromex® 3 Ply DISPOSABLE FACE MASK F103”

Your email address will not be published.